Vietnam War :: essays research papers

Vietnam War The Vietnam War was a military battle beginning in 1959 and finishing in 1975. It started as an endeavor by the Vietcong (Communist Guerrillas) to oust the Southern Vietnam Government. This exploration paper will talk about the Vietnam War, US inclusion in this war, and critical fights. Following the acquiescence of Japan to the Allies in August 1945, Vietminh guerrillas held onto the capital city of Hanoi and constrained the relinquishment of Emperor Bao Dai. On September 2 they pronounced Vietnam to be autonomous and declared the making of the Democratic Republic of Vietnam, usually called North Vietnam, with Ho Chi Minh as president. France authoritatively perceived the new state, yet the ensuing powerlessness of the Vietminh and France to arrive at acceptable political and monetary understandings prompted outfitted clash starting in December 1946. "Northern Vietnam was resolved to pick up it's freedom" (Davis 12). With French sponsorship Bao Dai set up the provi nce of Vietnam, usually called South Vietnam, on July 1, 1949, and built up another capital at Saigon (presently Ho Chi Minh City). "Where as the Southern Vietnam government appeared to be substance to be a kind of a colony" (Davis 12). The next year, the U.S. authoritatively perceived the Saigon government, and to help it. President Harry S. Truman dispatched a military help warning gathering to prepare South Vietnam in the utilization of U.S. weapons. In April 1961, an arrangement of friendship and financial relations was marked with South Vietnam, and in December, President John F. Kennedy vowed to enable South Vietnam to keep up its freedom. In this manner, U.S. financial and military help to the Diem government expanded fundamentally. In December 1961, the first U.S. troops, comprising of 400 formally dressed armed force faculty, showed up in Saigon so as to work two helicopter organizations; the U.S. declared, in any case, that the soldiers were not battle un its all things considered. After a year, U.S. military quality in Vietnam remained at 11,200. Before the finish of 1965 American battle quality was about 200,000. In February 1965, U.S. planes started ordinary bombarding attacks over North Vietnam. A stop was requested in May in the desire for starting harmony talks, yet when North Vietnam dismissed all dealings, the bombings were continued. From February 1965 as far as possible of full scale U.S. inclusion in 1973, South Vietnamese powers principally battled against the Vietcong guerrillas. While U.S. also, unified soldiers battled the North Vietnamese in a war of wearing down set apart by fights in such places as the Ia Dang Valley, Dak To, Loc Ninh, and Khe Sanh-all triumphs for the non-Communist powers.

Under Armour free essay sample

Fast change and development of innovation, influences organization by consistent improving item advancement, obtainment and creation process Political Legal factor Intellectual property rights law and guideline of the nations in worldwide market very fluctuate, influencing the organization to consider their unprotected protected innovation issue. Use Porter’s Five Forces Model to break down the attire, footwear, and hardware industry in the US. Given this examination, is the business alluring or ugly? Ans. In the first place, The danger of the passage of new contenders (High) due to †¢Total U. S. execution clothing business is ruled by existing brand ex. Under Armor, Nike and Adidas. The dedication for existing brand is very high while there’s high introductory speculation required also. For The dealing intensity of providers (High) as organization intensely depend on relative hardly any outsider providers. In addition, the protected innovation right possesses by providers, not one of a kind to us. Subsequently, the exchanging cost is high. Under Armor was first imagined in 1996 by Kevin Plank, who at the time was the uncommon groups commander for the University of Maryland football crew. Board, disappointed with having to over and again change his cotton shirt during rehearses, set out to make a shirt whose materials permitted the sweat to dry rapidly, making the competitor be snappier, quicker, and more grounded because of less difficult water weight. He made it his strategic build up a shirt utilizing engineered materials that took care of sweat most productively than was recently anticipated. He built up a shirt that utilized said engineered materials to deal with sweat and tried the model, suitably named 0039, with his own football crew. After he graduated, Plank went to a wide range of colleges attempting to discover a purchaser for his item. After some time, Plank discovered his large break when he figured out how to gain the football crew of Georgia Technical University as a customer. As the exhibition attire advertise has developed, Under Armor has expanded their item contributions, created various sorts of execution gear, and wandered into women’s clothing, footwear, and other product. This contextual analysis looks to dissect Under Armour’s history, assets, abilities, and center capabilities, business and corporate-level procedures, just as the general condition and serious scene. After cautious investigation of these changing territories, the elements adding to Under Armour’s current achievement and future difficulties will seem, by all accounts, to be much more clear. Current Situation Currently, 3Under Armor utilizes around 5900 people and, as far as income, they are the third biggest supplier of execution sports attire on the planet. They are right now just in direct rivalry with Nike and Adidas. In 2012, Under Armor had an expected income of $1. 8 billion dollars, with expected net income in the scope of $2. 84 billion to $2. 87 billion for 2014. This speaks to a development of 22 percent to 23 percent more than 2013. 4Under Armor has an expected working pay of $85. 3 million. As of late, shoes have been Under Armours quickest developing product offering, 5growing at a pace of around 31 percent from 2011 to $239 million in deals in 2012. Under Armor has immediately increased a notoriety of giving quality hardware and sports clothing, subsequently prompting the organization to be the official supporter of numerous games groups and people, for example, the Tottenham Hotspurs of the Barclay’s English Premier League. Under Armor is additionally rapidly turning out to be notable for its magnanimous commitments to the network. They as of now bolster the battle against bosom malignancy, just as being a major supporter of the Wounded Warrior Project (which helps troops injured in battle come back to typical living) and different youth outreach programs in the network. Industry Structure Being an emanant contender inside the oligopoly of the athletic attire industry, Under Armor is compelled to concentrate on quality and advancement to stay aware of rivalry and client requests. Other than Under Armor, the industry’s most conspicuous contenders are Nike and Adidas. In Figure 1 of the Appendix, a key gathering model represents Under Armour’s execution in contrast with the other driving rivals in a similar industry. 7The size of each air pocket is the measure of piece of the overall industry that that organization holds. As per the guide, Under Armor comes in at third spot; it is apparentâ that the firm needs to roll out certain improvements in the event that they want to stay a real player over the long haul. As appeared in Figure 2 of the Appendix, a Porter Five Force Analysis clarifies that the general competition inside the athletic attire industry is medium to high. Since Nike and Adidas as of now have a considerable measure of capital assets and different resources, Under Armor battles against them to pick up piece of the pie. 8Also, private names of retailers and fresher games clothing organizations might represent a danger to Under Armor, yet generally because of the way that Under Armor doesn't hold any texture or procedure licenses. This makes it incredibly simple for any contender to copy an item or procedure with no outcome. In any case, the danger of new contestants isn't excessively irksome inside the business in light of the incredible capital cost required for marking, publicizing, and fulfilling item need. Besides, the games attire industry is in the development period of the business life cycle. This implies each organization remembered for the oligopoly should contend legitimately against each other for piece of the pie. What's more, so as to abstain from turning into a more fragile firm and being compelled to exit, Under Armor should continually restore their product offering with better quality and new advancements. Full scale Environmental Trends In an assessment of Under Armour’s outside condition, or large scale natural patterns, the company’s political, monetary, socio-social, innovative, biological, and legitimate ecological patterns were thought of. Strategically, Under Armor doesn't confront numerous barricades. In the event that anything, the firm’s local activities profit by government sponsorships for eco-accommodating practices. Moreover, since this industry isn't typically called after during efforts, corporate charges stay stable (which means improbable to change) and political weights all bear a base on Under Armor in both the long and present moment. 9Looking at the United States GDP development in the course of the last four financial years, the economy has developed at a surmised 2. 4 percent. In spite of the fact that climbing, this number keeps on missing the mark regarding the ideal 3 to 4 percent development. With loan costs low, and consistent development in the economy quarter after quarter, the economy is looking all the more encouraging for huge organizations, for example, Under Armor. This additionally looks good for Under Armor since purchaser certainty is on the ascent and discretionary cashflow turns out to be increasingly accessible given the ascent in work in the course of the most recent year. Next, the socio-social condition was analyzed to perceive what the patterns are emerging far and wide. Albeit Under Armor began as an organization whose crucial to serve the best rigging to competitors all over the place so they could arrive at their pinnacle potential, Under Armor has become well known in the embellishments business. In addition to the fact that people are wearing Under Armor in athletic occasions, however in the homerooms, and even in the woodlands. Individuals of all socioeconomics are buying items from the business. Innovation is a power that can either represent the moment of truth a firm’s accomplishment in today’s business world. 10 With Under Armor, the organization normally redesigned its items as cutting edge textures when better execution attributes opened up and as the requirements of competitors changed. Since Under Armour’s advancement group stays current on innovation, there is nothing that the mechanical condition could have to compromise the organization. At last, natural and lawful conditions were analyzed. In the US, ecological and work laws expect organizations to keep up their carbon utilization at a directed level and give charge credits to those organizations that training economical exercises. Additionally, recruiting and advancement laws expect organizations to advance and recruit new representatives reasonably. 11 Employee surveys have been for the most part positive with respect to Under Armour’s human asset arrangements, yielding a better than expected endorsement rate. Key Typology Under Armor has a methodology that has situated them to be one of the main five athletic wear and adornment organizations in pretty much every class respected. They have done as such by assuming the job of miner (as indicated by the Miles-Snow model). By being the first to market such materials in athletic wear and garments, Under Armor gave an item that had at no other time been found in the realm of serious and non-serious games. With different parts of creation, for example, embellishments and later ages of clothing and rigging, Under Armor has additionally assumed the job of analyzer. This implies they tried the business sectors by utilizing competitors to test their more up to date items to decide the necessities of competitors †both expert and beginner †just as youth competitors. Interior Analysis The solid inward structure of Under Armor begins with CEO Kevin Plank. Since Plank established the organization he has the enthusiasm, commitment, and inspiration one needs so as to grow an organization into an enormous universal contender. Nobody will have a similar drive to cause their organization to succeed more than one’s self. Despite the fact that the organization is quite a long while behind Nike and Adidas, Under Armor has been developing consistently since its origin. 12Since 2004, Under Armor has expanded its overall gain from 25. 38 million to 208.62 million of every 2012 and is anticipated to continue developing. Under Armor has about 11. 20 billion of attire apparel advertise capitalization, w

Writing is Magic

Writing is Magic I have a personal blog that I write about my teenagers and I haven’t updated it lately. It’s not because I’m tired of writing- I’m not. And it certainly isn’t because of a lack of material. I have more material than ever lately with one kid on his way to college and the other on his way to a special arts program for his junior year. It’s because writing is hard. Some of you brilliant prospective MIT students know exactly what I mean. Writing well often means “being in the flow” and if you are not there, it’s kind of like plodding uphill knee-deep in mud on a hot humid day. Who wants to do that? When I do an info session for prospective students, I like to mention that there is a writing requirement here at MIT. To some of you, I know, that is not good news. But hopefully most of you already know how valuable it can be to learn to write and express yourself this way. My son has a pile of graduation thank you notes to write and I already know why he isn’t getting to them. He isn’t sure how to start. I have the same feeling when I look at my personal blog and realize it’s been months now without a new post. Where to begin again? But here is some advice for those of you worried about writing, or worried about writing your application essays this fall, or worried about writing a paper in college. (Yes, you will have to write at MIT even if you are a math and physics lover and were hoping to never experience that particular agony of the blank page ever again.) I have some good news. Writing is magic. Take a look at what one member of the MIT faculty, Nick Montfort, has done by merging his interests in puzzles and computer games with poetry. Think you don’t have a single idea, nothing to say? Just start writing. The process of writing is what creates the ideas. Sure, it’s ok to start with a few in your head and see what happens to them as you begin. But if you start with a blank mind, just the act of writing anything will get them to come. In my writing group we do an exercise when we all first assemble together. Before the socializing and advice sharing gets underway, we write. We put pen to paper the old fashioned way for 15 minutes. We might get a subject prompt, a first line of inspiration, or the suggestion of setting or theme, but the one rule is to create something with a beginning, a middle, and an end before the 15 minutes is up. True, sometimes you don’t create a masterpiece you wish to read aloud, but most of the time you are amazed to see that you have a written a story, an essay, or a finished poem. Most of the time, it’s actually something you can be proud of too, and in 15 minutes, really. It happens all the time.

What Makes An Effective Leader - 1084 Words

There is leadership in all of us, although some of us may not realize that we are capable to lead others in some degree. The world has seen its fair share of leaders, both effective and ineffective ones; some had used their leaderships in negative lights such as Manuel Noriega, former Panamanian Dictator or positive ones such as that of Franklin D. Roosevelt. [The use of the pronoun ‘his’ to refer to the leaders is incorrect. Since you discuss a variety of leaders here, it must be used in the plural form.]Despite their differences, both leaders were very effective in their crafts. One may ask â€Å"What make an effective leader?† In my opinion, communication is the key. In order for leaders to succeed, they should be able to strategically communicate to their audiences. Strategic Communication [A topic sentence in your own words is missing. What is the main idea of the paragraph? Answer this question in your own words and then use the quote to support the point that you are making.] When it comes to strategic communication, one may think of a room full of CEOs, generals, and secretaries engaging in conversations around the table on how to solve world problems. The picture that it paints is very dramatic however, it’s just as simple as listening to other people and reflecting upon their ideas. Strategic communication is defined as â€Å"communication aligned with the company’s overall strategy, to enhance its strategic positioning.† (Argenti, Howell, Beck, 2005) The definition ofShow MoreRelatedWhat Makes A Effective Leader? Essay1168 Words   |  5 PagesI. What is Leadership? â€Å"At times of change or dealing with uncertainty or in a crisis-- that is when the best leader will shine† (Ellis, 2016). A leader who can work effectively in a complicated, unpredictable situation is a competent leader and he tirelessly works to improve his capabilities (Ledlow Coppola, 2010). All great leaders are known for communicating effectively what they want to achieve. They are visionaries who have the ability to lead others toward a shared goal (Gibson Weber,Read MoreWhat Makes An Effective Leader? Essay717 Words   |  3 PagesReview Press. Article 1: What Makes an Effective Leader Central Theme: Article one focuses on the idea that in order to have an efficient or successful environment, whether it be a business, project, or group, a leader must be effective in their way of working and addressing such environment. The first article focuses not only in what a leader needs to do but why those factors characterize an effective leader. An effective leader is someone who essentially does what needs to be done, and theyRead MoreEssay on What Makes for an Effective Leader?954 Words   |  4 Pages The mystery of what makes one an effective leader has fascinated people for thousands of years. There is a great difference between leadership and management. Leadership in my opinion differs from management and requires transformational approaches. Peter F. Drucker says, Management is doing things right; leadership is doing the right things (Goodreads.com,2014). Management capabilities can be developed mostly through personal experiences while leadership skills are inher ent and there are thereforeRead MoreWhat Makes An Effective And Successful Leader? Essay1706 Words   |  7 Pages2015 according to Forbes, in order to determine what qualities make an effective and successful leader. It’s impossible to respect, value and admire great leadership if you can’t identify what makes a leader great (Llopis, 2016). This interview was conducted during his recent visit to the US on thanksgiving holiday and more feedbacks via the email. He shares some philosophies, characteristics, principles, and common strategies of effective leader, but differ in his views of the role of personalityRead MoreWhat Makes an Effective Team Leader?1305 Words   |  6 PagesWhat makes a great team leader? According to Victor Parachin, Thomas Jefferson made an excellent leader because he was optimistic, made things happen, and had a vision that he expressed clearly, was able to sell to others and successfully turned into reality. Effective leadership is a neces sity. Leadership has been a requirement of society since the beginning of time. If a companys goal is to progress, effective leadership is the key. Leadership is a vigorous method of relationship buildingRead MoreWhat Makes Me An Effective Leader?1083 Words   |  5 Pagesgoals. As a potential leader if I analyse through my ability of skills, I possess the skills of wisdom, self- transcendence, emotional regulation and critical life experience to a greater extend, where in I am very much inclined to a level of perfection when openness, sense of humour, reminiscence and reflectiveness are concerned. I am quite average when it comes to the different dimensions of being affective and reflective. My attributes of wisdom makes me an effective leader to manage performanceRead MoreLeadership And Communication : What Makes An Effective Leader?858 Words   |  4 Pagesothers in some degree. The world has seen its fair share of leaders, both effective and ineffective ones; some had used his leadership in negative lights such as Manuel Noriega, former Panamanian Dictator or positive ones such as that of Franklin D. Roosevelt. Despite their differences, both leaders were very effective in their crafts. One may ask â€Å"What make an effective leader?† In my opin ion, communication is the key. In order for leaders to succeed, they should be able to strategically communicateRead More What Makes Jack Welch an Effective Leader? Essay971 Words   |  4 PagesWhat Makes Jack Welch an Effective Leader? ---ideas from the article â€Å"Will Legacy Live On?† Before I talk about what makes Jack an effective leader, I want to explain briefly why I chose him as my study subject. Why do I like him? Jack Welch created a new model for business leaders everywhere. His genius leadership and management techniques are an example to anyone aspiring to a successful career. Why is he so famous? He became the youngest CEO and Chairman of one of Americas biggestRead MoreThe Five Practices Of Ideal Leadership1250 Words   |  5 Pages Effective Leader Introduction Leaders come to be great, not because they utilize their title power, but for their ability to empower others. Leadership can be complex for the reason that it is about developing coworkers that have different personalities and characteristics. One of the first two questions a person should ask themselves when becoming a leader in an organization are; one, what is leadership? Second, what does great look like? The questions are simple enough, but then againRead MoreValues That Make An Ethical Business Leader972 Words   |  4 PagesValues That Make an Ethical Business Leader Values and ethics are essential for any good business leader, but what exactly does it mean to have good values and ethics? Both are extremely broad terms, however they both are very relevant in business leaders. â€Å"Values can be defined as things that are important to or valued by someone. That someone can be an individual or an organization. Values determine what is right and what is wrong, and doing what is right or wrong is what defines ethics. To behave

Short Story Never Let Me Go Notes - 2343 Words

Emmett Janczak British Literature Never Let Me Go Notes Characters: Kathy H. main character and narrator, carer, went to Hailsham. Friends with Ruth and Tommy. Grew up with them both. Had special relationship with Tommy. Ruth friend of Kathy. Also went to Hailsham. Bossy, controlling but in the end shows regret for being so controlling. Admits to keeping Kathy and Tommy apart, feels remorse. Tommy D. Grew up with anger issue. Had problems being creative. Extremely caring and concerned for the well-being of Kathy and Ruth. Dated Ruth for years until setting with Kathy in the end. Miss Emily the â€Å"principle† of Hailsham. was very concerned for the treatment of donors. Set up an entire school to prove how human donors were. Madame/Marie-Claude supported Miss Emily in her efforts with Hailsham. would collect artwork from the students to try to prove to the public how perfectly human the â€Å"students† were Miss Lucy believed the â€Å"students† should know exactly how terrible the last days of their life would be, the admin at Hailsham believe otherwise, that they should live normal lives for as long as possible Harry C. a boy who Kathy talked with and planned to have sex with during her time at Hailsham Keffers an old man who looks after the Cottages and is very conservative and religious, gives Tommy his first notebook for his animals Chrissie highly dependent on her boyfriend Rodney, looks at Hailsham like a place with special privileges, low self worth Rodney in aShow MoreRelatedA Poetical Analysis of Queen ¡Ã‚ ¯S Bohemian Rhapsody1503 Words   |  7 Pagesthe Night otherwise known as Eve, or Lily). The actual Cosmic Battle in Bohemian Rhapsody concerns the Denial of Love, both Black and White (The March Of The Black Queen etc.). Bohemian Rhapsody could also be about the Lily and Phoenix story. The Lily and Phoenix Story is an overall theme that runs throughout Queen ¡Ã‚ ¯s music. Lily and the Phoenix play the roles of The Black Queen (Eve/Night) and the White Queen (Adam/Day). The Black Queen would obviously take on such roles (music-wise) as The KillerRead MoreExample Of Annotations In Dandelion Wine By William Shakespeare1530 Words   |  7 Pagesthe Colonel and Doug’s relationship. I brought the discussion back to the thematic topics of time, aging and growing up. I labeled all the chapters and made good inferences in the text. I used MACVP throughout all of the stories. A good example of using MACVP is in Never let me go, I used the C from MACVP to connect with the characters on page 149 where they were in the cottages growing up. In general as a reader, I became closer and closer to being alive and claiming my education farther into theRead MoreEssay about Emily Brontes Wuthering Heights1382 Words   |  6 PagesEmily Brontes Wuthering Heights 1) The story takes place in the early XIXth century. There are two characters in this extract : Mr Lockwood and Catherine Linton. Mr Lockwood is the first narrator of this novel, he was one of Mr Heathcliffs tenants. At the beginning of the story , there were three characters : Heathcliff, a foundling, his sister Catherine and his brother Hindley. Catherine fell in love with Heathcliff, but was married with Edgar Linton. So, the second character we meetRead MoreQuote Integration Essay examples944 Words   |  4 Pagespapers, I would expect at least 3-4 really strong quotations used to prove your topic.   The important word in the last sentence is â€Å"prove.†Ã‚   You do NOT use quotations to establish facts from the story.   You use quotations to PROVE something.    For example – I don’t need a quotation from the book to tell me that Tom Robinson is found guilty.   I have read To Kill a Mockingbird and I know that he is found guilty.   Be sure you are using quotations not to pad your paper, but to strengthen it.    ThereRead MoreI Was A Last Year Old Girl, Living Inside Myself Essay1005 Words   |  5 Pagesput up a mental shield between me and the rest of the world. No emotions, no trust, no love. Nothing. No one ever picked up on it, though. When my emotions had first started fading, I started paying attention to how other people acted, and got really good at feigning emotions. I had even perfected pretending to cry and laugh. No one ever noticed that I went without them. I never thought I would feel again. One day, in 6th grade, I got an email from a name I had never seen before. Hey. I was just wonderingRead MoreThe Importance Of Writing1196 Words   |  5 Pages I’ve always loved to write. Something about creating a new world that people could just get lost in is so fulfilling. I’d find whoever I could to read my work and praise me. It’s baffling thinking that stories and pieces of writing are all just words. Words put together with capitalization, punctuation, and style. The kicker is how those words are put together though. Words put together poorly can be incomprehensible. But, words put together just right can spark interest, thought, and amazementRead MorePhiladelphia Story Character Analysis1316 Words   |  6 PagesPhiladelphia Story Character Analysis George Cukor’s star studded romantic comedy, The Philadelphia Story (1940), offers modern viewers a look at changing personalities in 1930s/40s American high society. The film stars Cary Grant, Katherine Hepburn, and James Stewart in a clash of cultures centered around a wedding. Macaulay Connor (Stewart) is a reporter for tabloid like Spy Magazine, on assignment to write an exposà © on the marriage of wealthy Tracy Lord (Katherine Hepburn) with the helpRead MoreThe Love of a Woman in Paulo Coelho’s Novel The Alchemist Essay1121 Words   |  5 Pagesnovel The Alchemist the story of the shepherd boy Santiago and his journey to fulfill his Personal Legend unfolds from beginning to end. On his journey Santiago meets several significant male characters that play very important roles in the development of his character, his journey, and his story. There are only a few female characters in The Alchemist, as men dominate the story; however, one of these female characters also plays a very significant role in Santiago’s story. Santiago falls in loveRead MoreCourtney Hunt s Frozen River, And Edwidge Danticat s The Dew Breaker1584 Words   |  7 Pagesidea of sonder, writing their novels so as to focus on how sonder impacts people’s perspective on other people’s lives. In Yuri Herrera’s Signs Preceding the End of the World, Courtney Hunt’s Frozen River, and Edwidge Danticat’s The Dew Breaker, the stories explore the idea of sonder in two ways: the authors either show how characters gain different life perspectives, or they exhibit a version of dramatic irony where only the readers, and not the characters, are aware of how the characters’ lives intertwineRead MoreA Rose for Emily and The Yellow Wallpaper1723 Words   |  7 PagesThe stories, â€Å"A Rose for Emily† and â€Å"The Yellow Wallpaper,† both display how external dominance, isolation, and judgment from the outside world may cause one to lose their right mind. In both stories, the main characters begin to sink into further isolation from the outside world, leaving reality in the past. The point of view of each story is told from a firsthand account of the events that occur. In â€Å"A Rose for Emily,† the story is told from an outsider’s point of view, someone who has watched

Acer Group Free Essays

The Acer Group Acer global mission statement â€Å"fresh technology enjoyed by everyone, everywhere†. The Acer group allied with other companies is globally one of the largest Manufacturers for PC, computer parts. Mobile computers, network server components etc†¦ Starting in Taiwan, Acer was the market leader in thirteen countries around the world and ranked top five in thirty countries globally. We will write a custom essay sample on Acer Group or any similar topic only for you Order Now With more than 120 enterprises in 44 countries, supporting dealers and distributers over 100 countries, 23,000plus employees around the world excl Taiwan, , US$500million operation in OEM manufacturing, Concentrating on the 3E market- education, entertainment, e-commerce with all its abilities Acer truly made itself a Global Organization, in 1997. Working with Acer Operating independently, yet working together was one of the features of the Acer Group. Decentralization in organization allowed the Acer employees to become responsible in decision making process. The senior management however tried to preserve the concept of â€Å"Symbiotic common interest†, assuaging any difference of opinion and consolidating them, and keeping up the centralized core. The Acer group had a long term vision to transform as a high-tech global corporation, hence taking a smart step to enter foreign markets by allying with the local distributors, retailers, suppliers, Managers, labor etc. Every region has its own need in case of electronics; Acer kept up to the local needs and customized their products accordingly. A local touch was achieved by Acer with every person associated with be it the customer or supplier or its own employee. The Acer aimed at expanding its manufacturing globally, by setting 17 plants in different countries. However it faced the difficulty in transportation of the materials or assembled parts due to various custom restrictions in each region. Different countries applied ISO regulations independently. Certain times these made it difficult for the Acer to continue the traditional way of working as they had planned. The most affected area was the inventory at the global level. It was difficult to predict the inventory level in the market with rapid changes happening around, moreover the product supply was far away. It was now necessary to set up a centralized kitchen to each production unit to reduce the freight and material handling costs. Hence it adopted the ‘Fast Food Model’, wherein the perishable and non-perishable goods were handled and transported separately as per their need. The inventory turnover was however now reduced to half once the fast food was implemented. Each production unit now had its assembly plant, developed RD, which helped them in shortening the time and cost of component production to delivery. The quality of service they provided was of the foremost importance. Exploring Chinese Mainland Acer wanted to secure a firm footing in the niche market. After suffering the losses in 1996-97, Acer realized that to win over the large markets it has first capture the smaller surrounding the larger ones. The big markets like Japan and USA had so many competitors trying to find its place that it was impossible for Acer to step in or sustain. However Acer tried entering USA, facing a big time loss. This Failure motivated the Acer to apply the â€Å"Go† Game philosophy of the WAR. Capture the villages to win over the cities. Hence seeing immense scope in the mainland Acer had plans to set up the unit in the Mainland. The Acer Group assumed that being aware of the Chinese culture and ethics would make them easy to establish in the mainland, however the reality was not very pleasing. Initially the political issues between china and Taiwan since the World War II were the major concern. Neither did Taiwan Govt. allowed the invasion of Acer in China mainland, nor was China willing to welcome the setting of Acer in the mainland. However, later after few years in 1998, Taiwan opened its port for Chinese materials; china was still reluctant to do so. Every exchange of goods happened via the south port of china which increased the freight cost. The manager at Acer still thinks moving to china is a good decision as the political issues seemed to be sorting out to some extent as well the WTO granting them membership. Moreover he assumes to see immense resources which could ascend them to their destination. Yet again, there stood another problem the human resources. Though Taiwan and China are closely related traditionally both share complete different work cultures and ethics. The labor in china though was cheap; no guarantee was given about the reliability. No family bonding, no tax incentives, nothing worked. Moreover, the Taiwanese workforce, whether the manager or labor was reluctant to relocate; reason- safety issues, status and standard of living, higher level of education in Taiwan, ocial living which were genuine! Finding reliable, efficient, skilled work force another major issue Acer has to deal with. Discussion China is emerging country in manufacturing. It possesses abundant resources that could catalyze the success of any growing manufacturing industry. The case study indicates about the plans of Acer as well the problem they are facing implementing it. The sales exhibit shows the dr op downs of the company during 1996-97. Reason: move to bigger markets in its first step rather taking smaller ones. Hence capturing the niche is surely a wise decision. China has immense resources in terms of land, workforce, etc. Major PC manufacturers now realized the advantages of moving the plants to china, being among the first ones and nearest ones, Acer should not leave the opportunity of growing, for some hurdles across their way. †¢The Acer groups seems to lack with the international expertise from the previous experiences, networking is important in supply chain;they should associate with the locals to understand work culture of the Chinese labors, the incentive policy. Acer has been hiring the locals, and should follow the same and not force the Taiwanese to relocate. †¢However the senior management will have to relocate, in need of a skilled employee who can centralize the autonomy within each plant. The Taiwanese managers however can be provided with better social living facilities, relocation incentives that could maintain their standards. †¢Setting a plant in sparsely industrialized region, closer to east coast. More employment for the locals- cheap labor plus ready to learn. Maximize information flow; minimize material flow between Taiwan and China to avoid Political conflicts and custom issues by utilizing resources within. †¢Not many major PC manufacturers have their units in China, Setting a unit in China will help Acer to invade Asian and European countries. Reducing operation and transportation efforts and cost. To overcome the past loses, Changes in organizational working is necessary, hence risk is inevitable! Acer to man ufacture in China?! (Review) How to cite Acer Group, Papers

Pertussis Essays - Pertussis, RTT, Bacterial Diseases, Vaccination

Pertussis (whooping cough) What is pertussis? Pertussis, or whooping cough, is a highly contagious disease involving the respiratory tract. It is caused by a bacterium that is found in the mouth, nose and throat of an infected person. Approximately 100 to 200 cases are reported annually in New York State. Who gets pertussis? Pertussis can occur at any age. Although most of the reported cases occur in children under five years, 50 percent of these are in children under one year of age. How is pertussis spread? Pertussis is primarily spread by direct contact with discharges from the nose and throat of infected individuals. Frequently, older siblings who may be harboring the bacteria in their nose and throat can bring the disease home and infect an infant in the household. What are the symptoms of pertussis? Pertussis begins as a mild upper respiratory infection. Initially, symptoms resemble those of a common cold, including sneezing, runny nose, low-grade fever and a mild cough. Within two weeks, the cough becomes more severe and is characterized by episodes of numerous rapid coughs followed by a crowing or high pitched whoop. A thick, clear mucous may be discharged. These episodes may recur for one to two months, and are more frequent at night. Older people or partially immunized children generally have milder symptoms. How soon after infection do symptoms appear? The incubation period is usually five to 10 days but may be as long as 21 days. When and for how long is a person able to spread pertussis? A person can transmit pertussis from seven days following exposure to three weeks after the onset of coughing episodes. The period of communicability is reduced to between five and seven days when antibiotic therapy is begun. Does past infection with pertussis make a person immune? One attack usually confers prolonged immunity. What are the complications associated with pertussis? Complications of pertussis may include pneumonia, middle ear infection, loss of appetite, dehydration, seizures, encephalopathy (disorders of the brain), apneic episodes (brief cessation of breathing) and death. What is the vaccine for pertussis? The vaccine for pertussis is usually given in combination with diphtheria and tetanus. Immunization authorities recommend that DTP (diphtheria, tetanus, pertussis) vaccine be given at two, four, six and 12-15 months of age and between four and six years of age. A vaccine with an acellular pertussis component is now licensed for children age 15 months of age who have completed their primary series of DTP (first three doses). What can be done to prevent the spread of pertussis? The single most effective control measure is maintaining the highest possible level of immunization in the community. Treatment of cases with certain antibiotics such as erythromycin can shorten the contagious period. People who have or may have pertussis should stay away from young children and infants until properly treated.

How to Overcome Teenagers Problem Essay Example

How to Overcome Teenagers Problem Essay Example How to Overcome Teenagers Problem Essay How to Overcome Teenagers Problem Essay Random acts of kindness are a means by which we make a deliberate attempt to brighten another persons day by doing something thoughtful, nice, and caring for them. Kindness is a way of showing others that they count and that even in the face of hostility and selfishness, youre making a stand for kindness.Originally associated with Anne Herbert, who is said to have once written Practice random acts of kindness and senseless acts of beauty on a place mat in a restaurant,this concept has become an organized celebration through various events around the world, as well as referring to a general call to action in the name of kindness. And you dont need to wait for someone else to instigate a day or week of celebrations to practice random acts of kindness; you can put them into play any time you like!By doing kind acts for others, youre helping to create kindness-aware communities that value generosity of spirit and action and kindness toward others as essential parts of a healthy community . Here are some suggestions for encouraging others with your random acts of kindness. EXAMPLES OF ACTS OF RANDOM KINDNESS!!!!! Be kind. Kindness as an attitude is infectious. When youre willing to share your kindness, others will be inspired by your example and think about doing something as kind themselves.Fan that flame by being kind to everyone. Be thoughtful. Random acts of kindness can be shown through thoughtfulness about the needs of others. Use your manners as a form of kindness. Manners arent dead, theyve just been forgotten in many ways. Yet, manners are the bedrock of courteous and kind relations and their use is an indication of respect for others. Hold doors open for others, hold an umbrella over someone in the rain, and be on time for everyone youve promised to meet. Give out compliments generously.Theres usually an awkward silence when youre stuck in an elevator or waiting in a queue with a stranger. Instead of staring at the floor, find something you like about the o ther person and compliment him/her on it. Not only will it make him/her feel good, it just might kick off a conversation with a new friend. Volunteer. Offer helping hands. Do you ever see homeless people and feel overwhelmed by your inability to make a difference? Even if you cant save them all, you can do a lot with one small act.Buy a pair of gloves or dig up an old blanket, and give them to someone whos living in the cold streets or to any organization that serves the homeless. Share a little wealth around. Forgive somebody. You be amazed at the ripple effect an ounce of forgiveness can have in your life and in the lives of others. Unburden yourself of the past and think kind thoughts again about that person. Share a smile. When meeting a new person, or even chatting with an old one, express joy. Show that youre happy to be with them, and that they make you happy

The Definition of Hydrophobic With Examples

The Definition of Hydrophobic With Examples To be hydrophobic means to fear water. In chemistry, it refers to the property of a substance to repel water. It isnt that the substance is repelled by water so much as it has a lack of attraction to it. A hydrophobic substance exhibits hydrophobicity and may be termed hydrophobic. Hydrophobic molecules tend to be nonpolar molecules that group together to form micelles rather than be exposed to water. Hydrophobic molecules typically dissolve in nonpolar solvents (e.g., organic solvents). There are also superhydrophobic materials, which have contact angles with water greater than 150 degrees. Surfaces of these materials resist wetting. The shape of water droplets on superhydrophobic surfaces is called the Lotus effect, in reference to the appearance of water on a lotus leaf. Superhydrophobicity is considered a result of interfacial tension and not a chemical property of matter. Examples of Hydrophobic Substances Oils, fats, alkanes, and most other organic compounds are hydrophobic. If you mix oil or fat with water, the mixture will separate. If you shake a mixture of oil and water, the oil globules will eventually stick together to present a minimum surface area to the water. How Hydrophobicity Works Hydrophobic molecules are nonpolar. When they are exposed to water, their nonpolar nature disrupts hydrogen bonds between water molecules, forming a clathrate-like structure on their surface. The structure is more ordered than free water molecules. The change in entropy (disorder) causes nonpolar molecules to clump together to decrease their exposure to water and thus decrease the entropy of the system. Hydrophobic vs. Lipophilic While the terms hydrophobic and lipophilic are often used interchangeably, the two words dont mean the same thing. A lipophilic substance is fat-loving. Most hydrophobic substances are also lipophilic, but exceptions include fluorocarbons and silicones.

Cal report Essay Example | Topics and Well Written Essays - 500 words

Cal report - Essay Example We further, get to know and understand about the concepts of evidence based management along with the consideration of the management knowledge and profession in the category of science or art. After researching extensively on the management related issues, I learnt that research plays a significant role and gives in a major contribution in acquiring foundation knowledge and updated information. Through my analytical understanding, I came to conclude that the element of knowledge can be only created if we perform a task which results in value addition. While, the learning that that we obtain in our class is called experience. The process of creating knowledge, and gaining experiences has already begun altering my life and making it useful for further experiences. It was all in the course of my active role playing in the rigorous process of my learning that I started to determine and discover my position in the company. I began to investigate and figure out as to how and in what ways it is possible to learn for the experiences of other people around us.

Evaluate the arguments offered by Neil Postman in Technopoly on the Essay

Evaluate the arguments offered by Neil Postman in Technopoly on the basis of the history of America (1865 to the present) and in - Essay Example In short society is moving towards age of digital fashion that is more developed with the thoughts to provide maximum benefits to human beings. In early ages of 18th century this development was much limited with construction and better reconstruction works. But with the passage of time it became more of an electronic era rather then human society, this approach gave a boost to highly develop technology and use it for ease of humans. Except of lot of positive reviews and lovers of electronic era this truth can not be neglected that it made humans rusty with the same ratio! And to enlighten this aspect of modern life Neil Postman contributed with a lot of efforts and different approach. In an interview he mentioned his views about the new technology when he was asked about the positive and beneficial effects on society especially of the Internet and Email. It’s true that technology has been advancing nowadays, too fast, therefore we are at an era of speed, where computers as we ll as everything that has to do with growing technology rules our life, in the frame of Technopoly, having a relative impact on all fields of today life, mainly in USA, but no one is basically responsible for this, and all we have to do is follow growth of Technology, as Technopoly contributes to financial growth and we just have to follow the stream. Technopoly is a reality and we have to accept it and adjust to this reality. Technopoly is a need nowadays. But we should not compromise our moral values, nor can technopoly replace them, or substitute them. Our culture has changed, and we cannot do something else for it, just follow the stream. But this may not mean that we prefer Technopolis or culture based on Technopolis, and destruction of our old culture with books and manual work. Technology should’t becomes a way of life as it is nowadays, but just a helping tool, tool of adaption and not adoption. "Most of our daily news is inert, consisting of information that gives us something to talk about but cannot lead to any meaningful action.† (68).1 — Neil Postman In our digital era, all fields such as knowledge and education are ruled by technology. Postman claims that our today culture satisfies its needs from technology, also taking its orders from it. We can claim further by analyzing this argument that technology functions in a way of pyramid whereas: On the base is culture, on the center is technology and on the top is multicultural and globalization, being as superstructure, identified with globalization and digital era with all consequences in the moral and social field of technopolis, which rules our life. Thus education is by ruled by technology, a new culture is formed throughout technopolis, and work is based on it. Technology may mean the end of education, as instead of reading a book of literature we prefer surfing on the Internet. USA in the past two centuries, thus from 1865 and hence up to the two last decades of 20th centur y and even more, had been a country with a grown population and too many immigrants. These people used to go there to work, in the dawn of industrial revolution, and when still USA was a state the development of which was based on agriculture initially. Then multicultural society was not only enhanced by technology, but it created itself the conditions for technology development and a further relative developed culture, that today rules technopolis and it

Interrupts and interrupt applications

Interrupts and interrupt applications 8086 Interrupts And Interrupt Applications Introduction: Microprocessors are computers built on single IC. There can be more ICs also used for this. Most microprocessors allow normal program execution to be interrupted by some external signal or by a special instruction in the program. In response to an interrupt the microprocessor stops executing its current program and calls a procedure which sevices the interrupt. An IRET instruction at the end of the interrupt service procedure returns execution to the interrupted program. 8086 Interrupts And Interrupt Responses: An 8086 interrupt can come from any one of three sources. One source is an external signal applied to the non-maskable interrupt (NMI) input pin or to the interrupt input pin. An interrupt caused by a signal    applied to one of these inputs is referred to as a hardware interrupt. A second source of an interrupt is execution of the interrupt instruction. This is referred to as a software interrupt. The third source of an interrupt is some error condition produced in the 8086 by the execution of an instruction. An example of this is the divide by zero interrupt. If you attempt to divide an operand by zero, the 8086 will automatically interrupt the currently executing program. At the end of each instruction cycle, the 8086 checks to see if any interrupts have been requested. If an interrupt has been requested, the 8086 responds to the interrupt by stepping through the following series of major actions: 1) It decrements the stack pointer by 2 and pushes the flag register on the stack. 2) It disables the 8086 INTR interrupt input by clearing the interrupt flag in the flag register. 3) It resets the trap flag in the flag register. 4) It decrements the stack pointer by 2 and pushes the current code segment register contents on the stack. 5) It decrements the stack pointer again by 2 and pushes the current instruction pointer contents on the stack. 8086 Interrupt Types: The preceding sections used the type 0 interrupts an example of how the 8086 interrupts function. It has hardware caused NMI interrupt, the software interrupts produced by the INT instruction, and the hardware interrupt produced by applying a signal to the INTR input pin. DIVIDE-BY-ZERO INTERRUPT-TYPE 0: The 8086 will automatically do a type 0 interrupt if the result of a DIV operation or an IDIV operation is too large to fit in the destination register. For   a type 0 interrupt, the 8086 pushes the flag register on the stack, resets IF and TF and pushes the return addresses on the stack. SINGLE STEP INTERRUPT-TYPE 1: The use of single step feature found in some monitor programs and debugger programs. When you tell a system to single step, it will execute one instruction and stop. If they are correct we can tell a system to single step, it will execute one instruction and stop. We can then examine the contents of registers and memory locations. In other words, when in single step mode a system will stop after it executes each instruction and wait for further direction from you. The 8086 trap flag and type 1 interrupt response make it quite easy to implement a single step feature direction. NONMASKABLE INTERRUPT-TYPE 2: The 8086 will automatically do a type 2 interrupt response when it receives a low to high transition on its NMI pin. When it does a type 2 interrupt, the 8086 will push the flags on the stack, reset TF and IF, and push the CS value and the IP value for the next instruction on the stack. It will then get the CS value for the start of the type 2 interrupt service procedure from address 0000AH and the IP value for the start of the procedure from address 00008H. BREAKPOINT INTERRUPT-TYPE 3: The type 3 interrupt is produced by execution of the INT3 instruction. The main use of the type 3 interrupt is to implement a breakpoint function in a system. When we insert a breakpoint, the system executes the instructions up to the breakpoint and then goes to the breakpoint procedure. Unlike the single step which stops execution after each instruction, the breakpoint feature executes all the instructions up to the inserted breakpoint and then stops execution. OVERFLOW INTERRUPT-TYPE4: The 8086 overflow flag will be set if the signed result of an arithmetic operation on two signed numbers is too large to be represented in the destination register or memory location. For example, if you add the 8 bit signed number 01101100 and the 8 bit signed number 010111101, the result will be 10111101. This would be the correct result if we were adding unsigned binary numbers, but it is not the correct signed result. SOFTWARE INTERRUPTS-TYPE O THROUGH 255: The 8086 INT instruction can be used to cause the 8086 to do any one of the 256 possible interrupt types. The desired interrupt type is specified as part of the instruction. The instruction INT32, for example will cause the 8086 to do a type 32 interrupt response. The 8086 will push the flag register on the stack, reset TF and IF, and push the CS and IP values of the next instruction on the stack. INTR INTERRUPTS-TYPES 0 THROUGH 255: The 8086 INTR input allows some external signal to interrupt execution of a program. Unlike the NMI input, however, INTR can be masked so that it cannot cause an interrupt. If the interrupt flag is cleared, then the INTR input is disabled. IF can be cleared at any time with CLEAR instruction. PRIORITY OF 8086 INTERRUPTS: If two or more interrupts occur at the same time   then the highest priority interrupt will be serviced first, and then the next highest priority interrupt will be serviced. As a example suppose that the INTR input is enabled, the 8086 receives an INTR signal during the execution of a divide instruction, and the divide operation produces a divide by zero interrupt. Since the internal interrupts-such as divide error, INT, and INTO have higher priority than INTR the 8086 will do a divide error interrupt response first. Hardware Interrupt Applications: Simple Interrupt Data Input: One of the most common uses of interrupts is to relieve a CPU of the burden of polling. To refresh your memory polling works as follows. The strobe or data ready signal from some external device is connected to an input port line on the microcomputer. The microcomputer uses a program loop to read and test this port line over and over until the data ready signal is found to be asserted. The microcomputer then exits the polling loop and reads in the data from the external device. The disadvantage of polled input or output is that while the microcomputer is polling the strobe or data ready signal, it cannot easily be doing other tasks. I n this case the data ready or strobe signal is connected to an interrupt input on the microcomputer. The microcomputer then goes about doing its other tasks until it is interrupted by a data ready signal from the external device. An interrupt service procedure can read in or send out the desired data in a few microseconds and return execution to the int errupted program. The input and output operation then uses only a small percentage of the microprocessors time. Counting Applications: As a simple example of the use of an interrupt input for counting , suppose that we are using an 8086 to control a printed circuit board making machine in our computerized electronics factory. Further suppose that we want to detect each finished board as it comes out of the machine and to keep a count with the number of boards fed in. This way we can determine if any boards were lost in the machine. To do this count on an interrupt basis, all we have to do is to detect when a board passes out of the machine and send an interrupt signal to an interrupt input on the 8086. The interrupt service procedure for that input can simply increment the board count stored in a named memory location. To detect a board coming out of the machine, we use an infrared LED, a photoresistor and two conditioning gates. The LED is positioned over the track where the boards come out, and the photoresistor is positioned below the track. When no board is between the LED and the photoresistor, the light from t he LED will strike the photoresistor and turn it on. The collector of the photoresistor will then be low, as will the NMI input on the 8086. When a board passes between the LED and photoresistor, the light will not reach the photoresistor and turn it on. The collector of the photoresistor will then be low, as will the NMI input on the 8086. Timing Applications: In this it is shown that how delay loop could be used to set the time between microcomputer operations. In   the example there, we used a delay loop to take in data samples at 1 ms intervals. The obvious disadvantage of a delay loop is that while the microcomputer is stuck in the delay loop, it cannot easily be doing other useful work. In many cases a delay loop would be a waste of the microcomputers valuable time, so we use an interrupt approach. Suppose for example, that in our 8086 controlled printed circuit board making machine we need to check the ph of a solution approximately every 4 min. If we used a delay loop to count off the 4 min, either the 8086 wouldnt be able to do much else or what points in the program to go check the ph. 8254 Software-Programmable Timer/Counter: Because of many tasks that they can be used for in microcomputer systems, programmable timer/counters are very important for you to learn about. As you read through following sections, pay particular attention to the applications of this device in systems and the general procedures for initializing a programmable device such as 8254. Basic 8253 And 8254 Operation: The intel 8253 and 8254 each contain three 16 bit counters which can be programmed to operate in several different modes. The major differences are as follows: 1) The maximum input clock frequency for the 8253 is 2.6 MHz, the maximum clock frequency for the 8254 is 8MHz. 2) The 8254 has a read back feature which allows you to latch the count in all the counters and the status of the counter at any point. The 8253 does not have this read back feature. The big advantage of these counters, however, is that you can load a count in them, start them and stop them with instructions in your program. Such a device is said to be software programmable. 8259a Priority Interrupt Controller: In a small system, for example, we might read ASCII characters in from a keyboard on an interrupt basis; count interrupts from timer to produce a real time clock of second, minutes and hours and detect several emergency or job done conditions on an interrupt basis. Each of these interrupt applications requires a separate interrupt input. If we are working with an 8086 , we have problem here because the 8086 has only two interrupt inputs, NMI and INTR. If we save NMI for a power failure interrupt, this leaves only one input for all the other applications. For applications where we have interrupts from multiple sources, we use an external device called a priority interrupt controller. Software Interrupt Applications: The software interrupt instruction INT N can be used to test any type of interrupt procedure. For example to test a type 64 interrupt procedure without the need for external hardware, we can execute the instruction INT 64. Another important use of software interrupts is to call Basic Input Output System, or BIOS, procedures in an IBM PC-type computer. These procedures in the system ROMS perform specific input or output functions, such as reading a character from the keyboard, writing some characters to the CRT, or reading some information from a disk. To call one of these procedures, you load any required parameters in some specified registers and execute an INT N instruction. N in this case is the interrupt type which vectors to the desired procedure. Suppose that, as part of an assembly language program that you are writing to run on an IBM PC type computer, you want to send some characters to the printer. The header for the INT 17H procedure from the IBM PC BIOS listing. The DX, AH, and AL registers are used to pass the required parameters to the procedure. The procedure is used for two different operations: initializing the printer port and sending a character to the printer. The operation performe d by the procedure is determined by the number passed to the procedure in the AH register. AH=1 means initialize the printer port, AH=0 means print the characters in AL, and AH=2 means read the printer status and returned in AH. If an attempt to print a character was not successful for some reason, such as the printer not being turned on, not being selected, or being busy, 01 is returned in AH. The main advantage of calling procedures with software interrupts is that you dont need to worry about the absolute address where the procedure actually resides or about trying to link the procedure into your program. So at last every microcomputer system uses a variety of interrupts and this is all about 8086 interrupts and applications. Conclusion: Microprocessors are computers built on single IC. There can be more ICs also used for this. Most microprocessors allow normal program execution to be interrupted by some external signal or by a special instruction in the program. In response to an interrupt the microprocessor stops executing its current program and calls a procedure which sevices the interrupt. An IRET instruction at the end of the interrupt service procedure returns execution to the interrupted program. An 8086 interrupt can come from any one of three sources. One source is an external signal applied to the non-maskable interrupt (NMI) input pin or to the interrupt input pin. An interrupt caused by a signal  Ã‚   applied to one of these inputs is referred to as a hardware interrupt. A second source of an interrupt is execution of the interrupt instruction. This is referred to as a   software interrupt. The third source of an interrupt is some error condition produced in the 8086 by the execution of an instructio n. An example of this is the divide by zero interrupt. If you attempt to divide an operand by zero, the 8086 will automatically interrupt the currently executing program. At the end of each instruction cycle, the 8086 checks to see if any interrupts have been requested. One of the most common uses of interrupts is to relieve a CPU of the burden of polling. To refresh your memory polling works as follows. The strobe or data ready signal from some external device is connected to an input port line on the microcomputer. The microcomputer uses a program loop to read and test this port line over and over until the data ready signal is found to be asserted. The software interrupt instruction INT N can be used to test any type of interrupt procedure. For example to test a type 64 interrupt procedure without the need for external hardware, we can execute the instruction INT 64. So at last we conclude that every microcomputer system uses a variety of interrupts and this is all about 8086 int errupts and applications. References: 1) DOUGLAS V.HALL, â€Å"microprocessors and interfacing† TaMcGRaw-Hill edition 2) www.wikipedia.com 3) www.google.com

Short Story the Painted Door

The Painted Door Summary Short story A Painted Door written by Sinclair Ross is a story that hides many meanings. The intelligent usage of symbolism and comparisons also add to the amount of thought and understanding being put towards the overall picture. It is clear that the author is not only about telling the story, rather he focuses much more on the voice, setting, and symbolism of the piece. The story was relayed to the readers in third person; the author also being the narrator.This gives him much more power to portray images and descriptions that could not be shown any way else. â€Å"She went on blowing against the frosted pane, carefully elongating the clear place until it was oval-shaped and symmetrical. † In this particular statement he is making the readers think about why this is being done. The setting of the story allowed for a lot of symbolism to be used; it was an average farm in the midst of the winter season. Feature Article – Short Story  The Plane of the Sleeping BeautyA lot of white colors being described and the cold and emptiness were also to the author’s advantage. As John the farmer goes to visit his father for the evening, his wife Ann tries to hold him back. As the final decision is made by the male character, we are introduced time and time again to the cold and emptiness of the setting. These tools are the author’s way of telling us how she feels and to prepare us for what is to happen next. As Steven, a close friend comes over, Ann begins to pretty herself up.These are all things that build towards the ending; of Ann’s Affair and Steven’s Suicide. The painted Door is a very interesting short story considering its great usage of symbolism as well as its setting. The author does a good job in portraying to us not only happenings but feelings and emotions as well. â€Å"The leap of light and shadow sank, and a chill crept in again†¦Ã¢â‚¬  The Painted Door Cover Page Rationale While creating a cover page for short story The Painted Door by Sinclair Ross, I considered many elements.In the end I chose aspects of symbolism because they would be the most effective and powerful way to portray the meaning of the story, without giving away the ending. The color white was very significant throughout the entire story, whether it was snow or the paint Ann used. This is why I chose the main color to be white and the whole picture to be washed out and faded. The background picture was that of a cobweb, implementing the idea of old or lost. This is telling us that the love of Ann and John is as such.The wood as another background simply describes the setting; an old farm house â€Å"unpainted† which is the whole reason Ann begins to paint. The chain coming across the entire picture is a symbol of the connection between Ann and her husband John. Many links form a chain holding them together even if they both don’t realize it. If you look closely to the bottom right corner, you will notice there is a cat looking towards a faded couple in midst of a kiss. The cat is a representation of deception and slyness, whereas the couple represents the affair between Ann and Steven.By having the cat face towards that direction, it portrays the fact that the affair was a total act of deception. Overall, I think my picture is a accurate presentation and cover page to the story because of the specific choice of used symbolism, given examples and relation to the setting and plot. The fact that everything is faded together almost gives it a look as if it all were a memory, also adding taste to the story; being portrayed from the past. For all these reasons, I have made my picture look how it does. Works Sited Ross, Sinclair. The Painted Door. 1, 10

Timeline of the Russian Revolutions 1918

Raising The Minimum Wage - 2447 Words

The minimum wage is defined as the lowest compensation, by law, which an employer may pay his or her employees. In the United States, this monetary value is set by a collection of laws on the federal, state, and local levels. While state and local governments may choose to observe a higher minimum wage than the national minimum wage, the federal government ultimately controls the income of the nation’s lowest-earning employees. At the federal level, the minimum wage was last raised in 2009, from $6.55 to $7.25 per hour. Yet, since 2009, the minimum wage has stayed the same, while the cost of living continues to climb. For this reason, an initiative to raise the minimum wage has numerous supporters, whose key arguments are the reduction of poverty and the increase in efficiency. At the same time, however, opponents of raising the minimum wage claim that it would result in unemployment and would be harmful to businesses. Although their arguments are valid, proponents of raising the minimum wage fail to see the effects of an increase in labor costs on employers. With any cost, one party benefits while another party pays. Furthermore, a raise in minimum wage, and an increase in the cost of labor, will result in losses not only for the employer, but also for the employee. Therefore, for those members of society who fall below the poverty line, raising the current minimum wage will do more harm than good. In her essay titled â€Å"Minimum Wages,† former economics professor LindaShow MoreRelatedRaising The Minimum Wage? Essay1217 Words   |  5 PagesThe minimum wage is one of the most discussed issues around the country. Everyone has a different opinion if raising the minimum wage would help families across the country to have a better lifestyle or if would cause an unbalance in the economy. Democrats and Republicans have a different view on this issue, while Democrats supports raising the minimum wage by $15 an hour, Republicans have stated that they refuse increasing the wage because it would leave different factions of Americans outside ofRead MoreRaising Minimum Wage912 Words   |  4 PagesMinimum wage has long been a topic that has brought on many heated debates. It has been said over and over again that minimum wage should be raised. These people say that raising minimum wage only does good for people. However, I, along with many other people, believe this is wrong, and we should instead be making moves to keep minimum wage where it is. Raising minimum wage may provide some positive effects, but those positives only go on to be overwhelmed by the negative effects caused by it. WagesRead MoreRaising The Minimum Wage?1575 Words   |  7 PagesThe issue of raising the minimum wage from $7.25 to $15 an hour is a heavily debated topic. Both sources against or in favor of the minimum wage refer to a â€Å"growing gap† between low-income workers and high-income earners. Sources against the minimum wage believe raising it will increase this gap, whereas those in favor of the minimum wage believe it will decrease this gap. The arguments in favor of the minimum wage rely mostly on ethical beliefs, such as â€Å"pay should reflect hard work,† to advanceRead MoreRaising The Minimum Wage888 Words   |  4 Pages Raising the Minimum Wage The employment effect of the minimum wage is one of the most studied topics in all economics. Today, the debate over raising the minimum wage has been a hot topic after President Obama explained in his 2014 State of the Union address that he intends to raise the minimum wage from $7.25 to $10.10 per hour, an increase of over 40 percent. While the President and his supporters claim that this increase would greatly benefit the economy and result in growing the businessesRead MoreRaising The Minimum Wage?1122 Words   |  5 Pagesâ€Å"Raise the wage!† reads many protestors’ signs across America. Many people believe this to be the answer to the financial inequality that plagues our country. The federal minimum wage was established to keep workers from settling on a poor living standard (Leonard A.11). Since this was passed, multiple debates and issues have risen. One begins to ask the question, is this truly the best way to resolve the unequal distribution of wealth? Aft er research, it has been found that there are many drawbacksRead MoreRaising The Minimum Wage1979 Words   |  8 PagesResearch Raising the minimum wage can result in job losses due to lower profits for businesses. It can also potentially decrease employee hours by changing them from full time to part time. Additionally, it may reduce the full time benefits that they receive. If this were to happen, then the employees affected will actually be earning less than they did before the increase. For example, from the Article Maximum Divide on Minimum Wage (Mejeur, 2014), they state, â€Å"Labor costs are the largest shareRead MoreRaising The Minimum Wage?870 Words   |  4 PagesThe topic of raising the minimum wage has many different viewpoints. It is thought to be affected negatively and positively. Some believe it increases unemployment and poverty. Others believe it creates jobs, helps the economy and low-income families by giving them more money to give back to the economy. Doug Hall, director of the Economic Analysis and Research Network and David Cooper, Economic Analyst at the Economic Policy Institute, expressed how the increase in minimum wage affects certainRead MoreRaising The Minimum Wage1037 Words   |  5 PagesRaising the minimum wage from $7.25 to $10.10 is not a good idea. The unintended consequences that would come about as a result is reason enough to shy away from such a proposal. Those who support an increase contend that it will alleviate poverty. Suppose these advocates are right and a spike in the minimum wage does reduce poverty for some fortunate workers. This positive development will be offset because an increase in the minimum wage will further price out inexperienced workers from the jobRead MoreRaising The Minimum Wage1864 Words   |  8 Pagespersevere, and really believe in yourself, good things will come. Drastically raising the minimum wage goes against all of those principles, rewarding lethargic actions and poor life c hoices. Raising the minimum wage to $15 will do more harm than good for middle class americans by decreasing the value of the money in their pockets, driving out big companies, and generally increasing unemployment. Increasing the minimum wage causes middle class Americans have less money in their pockets to spend. RepresentativesRead MoreEffect Of Raising Minimum Wage1215 Words   |  5 PagesEffects of Raising Minimum Wage The minimum wage in this country has been a controversial issue. Many people believe it will help reduce poverty and boost the economy. However, they are not looking at the downfalls this will bring to our country. This could make the unemployment population rise, it will raise prices of other things, and would have little effect on reducing poverty. Raising the minimum wage would have a negative influence on our country. This movement throughout our country